Sunday, August 3, 2008

power supply (now 0.75-30V / 2.7A), part 5.

One last part is needed to put the wires together. Just incase it needed to be taken apart (maybe because things can screw up sometimes? ;-P ) I wanted to be able to de-solder the wires leading to the heat sink from the print board. Therefore I cut out a piece of plexi-glass (I cut a semicircle), drilled some holes in it and mounted solder lugs on them. One for each wire to be connected. After this it was testing time (basically a check to see if nothing explodes ;-).

The piece of plexi-glass is at the front here. Click the picture for a slightly larger, but much clearer version.

The finished back.

The finished front.

Finished from above.

Project completed successfully!


Kees said...

It needs a Kenwood knob on the front.

Gledwood said...

Vincent, you're too much of a wiry intellectual for me... and you do these things just for fun...?//?!?

Vincent said...

@ Kees: No it doesn't ;-P

@ Gled: Yeah, I do this for fun. Other people sit in front of the tellie all evening :-)